Tuesday 31 July 2012

Bristan Easyfit


Bristan Easyfit Taps
Fitting taps is not technically difficult but the locations you have to wriggle into and under can turn what should be a simple job into a bit of a nightmare. 

As I mentioned in the Home plumbing manual, throwing away the copper pipes that come with most taps and fitting flexible tap connectors can make things much easier but it's still the kind of job that most plumbers try to avoid because it's such a pain. However, help may be on its way in the form of the new range of Bristan Easyfit taps.

Basically the tap now comes in two parts. You fit the base, which comes with flexible connectors and isolation valves, and then, when you've finished the tiling and applied your sealant lines, you fit the tap onto this base!

We had a play around with this last year up at Bristan’s offices. Yes, there were a few issues at the time but the fact that they'd made a point of asking installers to try them out and give them feedback is in itself a wonderfully sane approach to plumbing design - although sadly not one that seems to have caught on much within the industry.

Of course the main benefit of a two part tap comes later on when you need to update it or just give it a good clean. Instead of having to burrow under the basin or bath for a sweaty and frustrating half hour you can just isolate the water supply and then remove the tap body from the top and fit the new one into place. What could be simpler?

Yes, you’d have to replace the old Bristan tap with a new Bristan tap, but I can think of many more traumatic things in life.

All in all they are well worth having a look at - in fact to have a look click here: tapfittingchampionships

------- update -----

Over the last few yeas we've come across a number of customers who have had problems with these taps, mainly because the grub screw that holds the tap in place fails, the tap blows off and a deluge ensues. I have to assume that Bristan are sorting this out - more than 1 grub screw and some sort of locking mechanism would seem sensible - but I don't know for sure. With this in mind you might just want to check the grub screw every 6 months or so and just give it a little tweak to keep it in place.

4 comments:

  1. A word of appreciation for you.The art of doing of writing things is excellent.Keep posting articles like these.

    plumbers bangholme

    ReplyDelete
  2. I'VE JUST HAD A EASY FIT MONO BLOW OFF AND FLOOD A KITCHEN AFTER THREE MOUNTHS ANY IDEAS

    ReplyDelete
    Replies
    1. We've had the same thing happen when the grub screw that holds it all in place gave way. Have a chat to Bristan would be my suggestion.

      Delete
  3. I've had the same problem with a Monza mixer tap. After only 10 months the tap came off and flooded my new kitchen. Bristan are coming out to replace the tap and look at the damage.

    ReplyDelete